Anti-Ligature Coat Hook SSS

Satin Stainless Steel
Anti Ligature Coat Hook complete with two 8x2 torx pin screws


Designed for use in facilities where conventional coat hooks might be used as ligature points. Supplied set to support 2 kilo, enough for most garments. Weight bearing can be increased by tightening the adjuster screw in the base with a 6mm alan key do not over tighten as this will jam the pin in place. Supplied with two 8mmx2mm screws Do not use power drivers as this will damage the torx pin heads and will prevent the screws being screwed tightly enough to ensure the base is flat to the host surface.